Built-under Horizontal buffer storage tanks

• Choose from capacities that start at 120L and go up incrementally to 500L.

• Units are suitable for use with oil and gas condensing boilers.

• The horizontal alignment is designed for use in confined spaces.

These horizontal built-under OEG buffer tanks can fulfill highest demands on heat storage!
Buffer tanks are primarily used with heat generators whose optimum efficiency is achieved at full-load (e.g. solid fuel boilers). During the operation of the heat generator, the water of the buffer tank is heated and stored. Later, if required, this heat can be called upon during standstill periods.
The horizontal position of built-under storage tanks allows the use in restrictive spaces (e.g. below inclined walls and stairs) for space saving purposes.

SPECS:

• 50 mm hard-foamed PU rigid foam insulation

• Allows loads up to 500 kg

• Maximum operating pressure: 3 bar

• Maximum operating temperature: 95° C

• 1½" connection for the use of an electric heating rod (Rp1½")

These buffer tanks are made of S235JR steel and include removable PES fleece insulation. Choose from red, blue, white, or grey. The solid, powder-coated steel sheet casing means the storage tank is particularly suitable as a built-under storage tank for all kinds of oil and gas condensing boilers of almost any manufacturer.