Description
Finished pool kit made of styrofoam blocks. It has a protective fleece and profile strip for pool liners with P3 wedge piping. The integral plug system makes it easy and quick to set the pool up. The polystyrofoam lining blocks made of expanded styrofoam are extremely light-weight and can just be plugged onto each other through a mortise- and-tenon joint, then they are filled with a steel reinforcement and concrete just like common concrete formwork. Due to this type of construction, a casing and insulation can be omitted. When heating the pool, an energy saving of about 30% compared to conventional concrete pools can thus be achieved.
No need for lengthly bricklaying build, just construct and fill with concrete and reinforcing.
| Scope of delivery: | |||
| 85 x | Styrofoam lining blocks 100 x 25 x 30 cm | ||
| 40 x | End insert | ||
| 8 x | Clamping profile strip for wedge piping P3 | ||
| 200 x | Drive rivets | ||
| 1 x | 2 m x 50 m protective fleece 300g/m² | ||
| 1 x | Fleece adhesive | ||
| Length x Width [m]: | 5 x 3 |
| Pool depth [m]: | 1.5 |
| Pool capacity [m³]: | 22.5 |
| Material: | Polystyrene |
| Insulating material: | EPS |
| Form: | Rectangular |
| Weight [kg] | 114 |
| Notes |
 |
